We offer wide range Manufacturer of Impact Pulverisers are high speed, grinding soft to medium hard minerals & chemicals up to the hardness of 3.5 – 4.0 Moh’s such as Minerals, Bentonite, Clays, Limestone, Neeru, Dolomite, Coal, Bauxite, Barytes, Gypsum, China Clay, Soap Stone, Calcite, Pyrophillite, Mehandi, Spices etc.
The main mill is equipped with a hopper below which is the STAR-FEEDER actuated by Pawl & Ratchet mechanism. The fine grinding is achieved by compression, shear, abrasion, attrition and impact of hammers / beaters on the materials against the replaceable serrated striking plates. The strong suction blower sucks the pulverized product and the air stream inside the mill carries the result product. In between the fan and the grinding chamber (having beaters / hammers) is the Air Classifier consisting of blades with tips tapered to conform the contour of Air classifier cone. Counter current is set up at the periphery indicated by arrows; it rejects the coarse material back to the grinding chamber for re-grinding. Clamping the whizzer blades at a suitable position can control fineness. The entire wearing parts consisting of grinding chamber, whizzer classifier and blower are lined with replaceable lining plates.
The function of the Cyclone Separator is to separate the fine pulverised materials from air which is re-circulated in the grinding chamber to complete the closed circuit grinding action. Inside the cyclone the dust laden gas enters a cylindrical chamber tangentially and leaves through a central opening. The air path forms a double vortex with the air spiraling downward at the outside and upward at the inside. The excess air coming in the system with feed material, etc. is bled off through a tubular type Dust Collector. The entire system works under suction except blower to cyclone pipe. The grinding chamber is provided with a small pocket where small pieces of iron, nuts and bolts are trapped.
It is manually fed as a normal practice. However, it can be supplied with automatic feeding also It runs at low speed compared to machines using screen, hence much lass maintenance.
|1||TEIP – 8||30||40 To 325||5 to 7.5||2800|
|2||TEIP – 12||40||40 To 325||7.5 to 10||2800|
|3||TEIP – 16||60||40 To 325||10 to 15||2800|
|4||TEIP – 18||100||40 To 325||15 to 15||2600|
|5||TEIP – 25||250||40 To 325||25 to 30||2400|
|6||TEIP- 32||500||40 To 325||50 to 60||2200|
|7||TEIP-32 [32”]||700||40 To 325||50 to 60||2000|
|8||TEIP –36||900||40 To 325||60 to 80||1800|
|9||TEIP –42||1200||40 To 325||100 to 125||1500|